March 16thMack Trucks Celebrates 120 Years of Drive Axle Expertise with Introduction of the Mack® S852 85,000-lb. Tandem Axles
Mack Trucks introduced the Mack® S852, an 85,000-lb. GAW (gross axle weight) rating of its proprietary tandem drive axles. The new rating, which is available for order now, comes as Mack celebrates 120 years of drive axle design, engineering and manufacturing this year and highlights its iconic Mack S-series axles (left) and C-series axle carriers (right). All Mack proprietary drive axles are built in the U.S. at Mack’s Hagerstown, Maryland powertrain facility (bottom).
Publication Date: 2020-03-16
To View Original Source in New Browser Window, click here: https://www.macktrucks.com/mack-news/2020/mack-trucks-celebrates-120-years-of-drive-axle-expertise/
Mack Trucks Celebrates 120 Years of Drive Axle Expertise with Introduction of the Mack® S852 85,000-lb. Tandem Axles
Mack Trucks today introduced the Mack® S852, an 85,000-lb. GAW (gross axle weight) rating of its proprietary tandem drive axles. The new rating comes as Mack celebrates 120 years of drive axle design, engineering and manufacturing this year and highlights its iconic Mack S-series axles and C-series axle carriers. The Mack S852 is available for order now.
“Mack has a long and rich history of engineering and manufacturing its own powertrain components, including drive axles, as it fits with our philosophy that components designed to work together, simply work better,” said Roy Horton, Mack Trucks director of product strategy. “We welcome the new S852, which will broaden the applications our trucks are built to handle.”
Customers in Mack’s export markets expressed a strong interest in the new rating, where local applications require a heavier-duty axle. Customers in North America will also be able to spec the 85,000-lb. rated axle for specialized severe-duty or heavyhaul applications on Mack Granite models. For extreme loads at slow speeds, the S852 tandem drive axles have a creep rating of 105,000 lbs.
The new S852 pulls from a long history of Mack drive axle expertise. The very first Mack drive axles were found on the original Mack bus model built by the Mack Brothers Company in 1900 that transported sightseers through Prospect Park in Brooklyn. After operating in Prospect Park for eight years, the bus was converted into a truck and continued operating until 1923, accumulating more than one million miles.
A major advancement in Mack axle design occurred in 1920 with the introduction of double-reduction architecture. This unique design maximizes durability by reducing the speed from the drive shaft before transmitting torque to the axle shaft, as well as helping spread and balance loading over two gear sets.
Today’s modern Mack proprietary drive axles are also engineered with a doublereduction design and include several design advantages implemented through continuous research and development efforts.
One such design advantage is the use of Durapoid bevel and helical gears. This design provides favorable gear tooth geometry that helps eliminate localized stress and loading on the gear tooth end, providing enhanced strength and longer gear life.
Frictional losses are also reduced in this gear design, allowing Mack axles to deliver up to 1.5 percent improved fuel efficiency.
“Low-traction situations can be a challenge for truck drivers, seriously impacting their productivity,” said Horton. “To help address that issue, we offer standard inter-axle and optional inter-wheel power dividers that automatically distribute torque between the slipping and non-slipping axle or wheel respectively. This elegant engineering solution is proven and reliable and requires no intervention from the driver.”
Mack proprietary axles also feature a top-mounted carrier design that is not only less prone to main seal leaks, but also provides more than two inches of additional ground clearance. This gives customers improved maneuverability at construction sites and other off-highway applications.
An additional benefit of Mack’s top-mounted carrier design is improved driveline angles between the drive axles. Instead of a three and a half to eight-degree angle, Mack’s prop shaft angle is just one to two degrees. This maximizes universal joint life, allows for greater axle articulation and reduces vibrations for a smoother ride. It also reduces torque losses for improved efficiency.
All Mack proprietary drive axles are built in the U.S. at Mack’s Hagerstown, Maryland powertrain facility and are available on Mack Anthem®, Pinnacle™, Granite®, TerraPro™ and LR models in a wide range of weight ratings. Mack axles also pair well with Mack’s suspension options, including Mack Twin-Y, Mack mRIDE™ and the legendary Mack Camelback for vocational applications.
To see what sets Mack axles apart, please click here. For more information about Mack drive axles, including the new 85,000-lb. S852, please visit www.macktrucks.com or your local Mack Trucks dealer.
Dedicated to durability, reliability and meeting the needs of customers, Mack Trucks has provided purpose-built transportation solutions for more than a century. Today, Mack is one of North America’s largest producers of heavy-duty trucks, and Mack® trucks are sold and serviced through an extensive distribution network in more than 45 countries. Mack trucks, diesel engines and transmissions sold in North America are assembled in the United States. Mack manufacturing locations are certified to the internationally recognized ISO 9001 standard for quality, ISO 14001 standard for environmental management systems and OHSAS 18001 standard for health and safety management systems. Mack is also a proud sponsor of Share the Road, an American Trucking Associations public information campaign aimed at enhancing the safety of our nation's roadways.
Mack Trucks is part of the Volvo Group, which is driving prosperity through transport and infrastructure solutions, offering trucks, buses, construction equipment, power solutions for marine and industrial applications, financing and services that increase customer uptime and productivity. Founded in 1927, the Volvo Group is committed to shaping the future landscape of sustainable transport and infrastructure solutions. The Volvo Group is headquartered in Gothenburg, Sweden, employs almost 100,000 people and serves customers in more than 190 markets. In 2019, net sales amounted to about $45.7 billion. Volvo shares are listed on Nasdaq Stockholm. For more information, please visit www.volvogroup.com.
